About the Program
Electrical and Electronic Engineering covers electrical plants, electronics, telecommunications, circuits and systems, electromagnetic fields, disciplines of microwave technology, robotics and control systems. Electrical Plants contain the design, operation, and maintenance of high-voltage devices, and also the design of various devices that belong to electricity generation and distribution systems; electronics, telecommunications, circuits and systems including the design, development, operation and maintenance of systems operating at low voltages. The electromagnetic fields and microwave techniques are involved in many systems that operate with high and low voltage devices. Control and robotic systems are mostly used to control high voltage devices by making use of the devices which operate at low voltage. Graduates are able to work in the telecommunications industry, alternative energy, and automation systems. The undergraduate program in Electrical and Electronics Engineering is offered in both English and Turkish.
Education Opportunities
Education and training activities in the Department of Electrical and Electronic Engineering are offered in laboratories equipped with state-of-the-art equipment and in classrooms with all the up-to-date technological facilities. There are eight faculty members who have completed postgraduate degrees in qualified and well-known universities. The faculty is composed of experienced academics who continue their scientific studies in their own fields of expertise, by supervising theses for postgraduate students. In addition to our two four-year undergraduate programs, there are Master of Science (M.S.) and Doctor of Philosophy (Ph.D.) programs focusing on academic research and development. Our undergraduates have the opportunity to specialize in fields, which are planned and offered based on today’s needs and expectations such as electrical plants, electronics, telecommunications, circuits and systems, electromagnetic fields, microwave technology, and robotic and control systems.
Accreditations
Electric-Electronic Engineering Program has been accredited by the Engineering Education Programs Evaluation and Accreditation Association (MÜDEK) in 2014, and has registered its place as a program with international quality standards. The program was also awarded the European Accredited Engineer Label EUR-ACE by MÜDEK.
Career Areas
Graduates of this department can work in big sectors, such as telecommunications, automation, and energy as engineers or in management in many fields of the industry. Graduates can also make major contributions to research and development in the R&D departments of a wide range of institutions and organizations. These include the Ministry of Energy and Natural Resources, electricity distribution companies, electricity transmission companies, construction companies, aerospace industries, automotive industry, scientific and technological research institutions, electronics and telecommunication design and manufacturing companies (e.g. Arçelik, Vestel Electronics, Beko, Turkcell, Aria, Huawei, and Ericsson).
In addition, our graduates can get a Free Engineer Consultant (SMM) authority as a member of the Electrical Engineers' Association (EMO), and they can easily carry out tasks specific to electrical engineering such as designing, implementing, testing, controlling, and signing.
Contact
Faculty of Engineering
Science and Technology Center, ST226
Tel: +90 392 671 1111 Extension: 2401
Faculty E-mail: secretary-fe@ciu.edu.tr
Head of Department: Prof. Dr. Mehmet KUŞAF
Head of Department E-mail: mkusaf@ciu.edu.tr
Compulsory Courses
First Semester
INTRODUCTION TO COMPUTING
Course code
CMPE101Credit
3Theoretical
2Practical
2Ects
5
This course presents the basics of computer systems. The course is structured in two parts; including a short history of computers, the first part of this course presents the history, basic concepts and terminology of information technology, basic hardware and software components of a computer system, and integration of computer system components. Besides the terminologies and abbreviations, the students learn about the hardware setup of a personal computer and the relations between the processor, memory and secondary devices. The laboratory part includes basic computer usage and office programs (MS Word, Excel). In the second part, basics of problem solving approaches, components and construction of computer programs, flow-charting, and modular programming issues are discussed. Basics of C programming language are covered in classroom.
INTRODUCTION TO ELECTRICAL & ELECTRONIC ENGINEERING
Course code
EELE100Credit
0Theoretical
1Practical
0Ects
3
Short history of Electrical and Electronic Engineering.Definition, scope and occupation areas of Electrical and Electronic Engineering. Interaction between related scientific and engineering fields. Academic staff and main scientific subdivisions and laboratories of the department. Vision, mission, program objectives and outcomes of the department. Education plan and quality development program of the department.Student counseling system and surveying. Summer training, technical trips, seminars and meeting activities of the department. Social and universal impact of Electrical and Electronic Engineering. Effective written and oral communication in engineering. Team work and project management in engineering. Ethical and professional rules in engineering.Life long learning concept.
READING AND WRITING SKILLS-I
Course code
ENGL141Credit
3Theoretical
2Practical
2Ects
4
This course aims to develop students' listening, speaking, reading - writing and study skills. The course provides students with the opportunity to develop their communication skills through controlled activities and to equip students with the basic study skills necessary to follow the curriculum of English. This course also provides students with the opportunity to process the newly acquired knowledge and to develop their ability to ask questions about how to apply the new knowledge to new situations and ask them to think critically. In addition, this course will enable students to learn about the different strategies required to review the various reading pieces, such as finding the main idea and distinguishing the details from the main idea.
HISTORY OF CIVILIZATION
Course code
HIST100Credit
0Theoretical
2Practical
0Ects
2
The aim of this course is to outline the development of civilizations in the course of history. It firstly focuses on the concepts such as “Civilization”, “Prehistoric”, and “Historic” and on the factors forcing the emergence of the first civilizations. As well as examining the prehistoric periods and their characteristics in the course of human life since the first appearance of human beings on earth, the course mainly focuses on the early civilizations, namely the Mesopotamian, Egyptian, Aegean, Classical Greek, Hellenistic, Indian, Chinese and Roman Civilizations. Political, social, economical, cultural, intellectual, philosophical and scientific aspects in these entities are also examined in this course.
CALCULUS-I
Course code
MATH101Credit
3Theoretical
3Practical
1Ects
6
Calculus-I provides the methods of differential and integral calculus with applications in geometry, physics and engineering. Students in this course will learn how to use mathematical language needed for applying the concepts of calculus to numerous applications in science and engineering such as identifying types of functions, graph of functions, evaluating limit of functions, limit of elementary functions (polynomial, trigonometric, logarithmic, exponential,…), methods to solve the undefined limits (L’Hopitals Rule), continuous functions, evaluate derivative of functions, definition of derivative, derivative of elementary functions, derivative of product of two functions and division of functions, applications of derivative, evaluate integrals of functions, definition of the integral, integral of elementary functions, substitution method, integration by parts, integral of rational functions, application of the integral (finding the area) .
LINEAR ALGEBRA
Course code
MATH121Credit
2Theoretical
2Practical
0Ects
4
The aim of this course is to introduce the basic operations in linear algebra and applications in engineering problems; matrices, matrix properties and matrix operations: Addition, scalar multiplication, multiplication, transpose, solution of system of linear equations: Elimination method, Gauss Jordan forms, inverse method to solve linear systems, row reduced echelon forms, Gaussian elimination method, inverse and determinants: solving linear equations with determinant (Cramer's rule), use one row to evaluate determinant, minor, cofactor, adjoint matrix, identity matrix, square matrix of the matrices. Real vector spaces, vectors and their properties and applications in engineering: Addition, subtractions, dot product, scalar multiplication, cross product, basis, dimensions and subspaces.
GENERAL PHYSICS-I
Course code
PHYS101Credit
4Theoretical
3Practical
2Ects
6
The aim of the course is to provide the basic information in order to help the students to understand the possible complicated problems in engineering. In this regard, the basic principles and methods of solving the problems in physics are thought. The course provides a basic grounding in elementary physics including mechanics. The basic subjects of the course are: Units and dimensions, Uniformly accelerated motion in one dimension, Freefall, Vector mathematics, Two dimensional motion, Newton’s laws of motion, Applications of Newton’s laws, Free body diagrams, Circular motion, Work and energy, Conservation of energy, Momentum, impulse, and collisions, Rotational kinematics, Torque, Static equilibrium. For completeness, the students are supposed to do 6 experiments related to the subjects of the course.
MODERN TURKISH HISTORY
Course code
TARH100Credit
0Theoretical
2Practical
0Ects
2
In this course, Ottoman state and society, factors causing the collapse of the state; Ottoman modernization; Tripoli and Balkan Wars, World War I, Mudros Armistice and Sevres Agreement; parties and associations, the national resistance movement led by Mustafa Kemal, the Havza and Amasya Circulars, the Congresses, the National Pact, the Turkish Grand National Assembly; the rebellions, the regular army and the War of Independence; the Mudanya Armistice, the Lausanne Peace Treaty; Revolution in the political field, secularization of the state and society, abolition of the sultanate, declaration of the republic, abolition of the caliphate; 1921 and 1924 constitutions, constitutional changes; Sheikh Said Rebellion; Multi-party experience, secularization and modernization in law, nationalization and secularization in education, Kemalizm and 6 principles, Turkish foreign policy(1923-1938) are covered.
Second Semester
GENERAL CHEMISTRY
Course code
CHEM110Credit
4Theoretical
3Practical
2Ects
6
In this course, Enginnering and Pharmacy Faculty students will learn types of matter, measurements, properties of substanes; atoms and atomic theory, components of the atom, introduction to the periodic table, molecules and ions, formulas of ionic compounds, names of ionic compounds; atomic masses, the mole, mass relations in chemical formulas, mass relations in reactions; measurements on gases, the ideal gas law, gas law calculations, stoichiometry of gaseous reactions, gas mixtures: Partial pressures and atomic spectra, the hydrogen atom, quantum numbers, atomic orbitals; shape and sizes; electron configurations in atoms, orbital diagrams of atoms; polarity of molecules; principles of heat flow, measurements of heat flow, calorimetry, enthalpy, thermo-chemical equations, enthalpies of formation, the first law of thermodynamics, liquids and solids.
INTRODUCTION TO PROGRAMMING
Course code
CMPE111Credit
4Theoretical
3Practical
2Ects
6
The course will introduce basic and fundamental programming constructs and techniques through using the C++ programming language in order to generate algorithmic solutions to problems. Upon completion of the course, students will learn an introduction to algorithms, solving problems by flowcharts and pseudo codes, header files, data types, arithmetic & logic operators, control statements (if, if/else, switch-case) and use them as inner statements, loop statements (while, do/while, for), functions, standard functions of programming language, random number generation and their area of use, user-defined functions, global and local variables, recursion, arrays, searching algorithms on arrays, sorting algorithms on arrays, pointers, pointer operators, using pointers with arrays and functions. In the laboratory hours, students are supposed to write full programs or modify existing programs for other solutions.
READING AND WRITING SKILLS-II
Course code
ENGL142Credit
3Theoretical
2Practical
2Ects
4
This course is the continuation of ENG 101. The course aims to improve students' listening, speaking, reading, writing and working skills. In the course, students are guided in writing compare and contrast essays using Venn diagram. In addition, the aim of the course is to learn the necessary conjunctions for composition writing. In addition, the students will be able to write a four-part critical composition by learning the difference between ideas and factual real sentences and how to write the opposing opinion and sentences used to refute it. Thus, the students will be able to distinguish between the compare and contrast essay and discursive essay. Students will also be able to make presentations by using presentation techniques. In addition, this course aims to summarize the reading pieces of the students and to use the strategies of reading and to draw conclusions and meanings using their reading skills.
CALCULUS-II
Course code
MATH102Credit
3Theoretical
3Practical
1Ects
6
This course provides the methods of differential and integral calculus with applications in geometry, physics and engineering. Topics included are as follows: Sequences and infinite series, properties of sequences, test for convergence, tests for series with both positive and non-positive series, absolutely convergence and conditionally convergence . Power series, Taylor and Maclaurin series, the radius of convergence. Parametric equations and Polar coordinates, the graph of polar equations, the area in polar coordinates, arc length, speed on a curve and derivative of polar equations. Vectors and vector-valued functions, dot product and cross product of two vectors. Lines and Planes. Functions of several variables, their domain, limit and partial derivatives and definite integral of a function over a region.
GENERAL PHYSICS-II
Course code
PHYS102Credit
4Theoretical
3Practical
2Ects
6
This course provides the basic information to help the students to understand the possible complicated problems in engineering. The subjects of the course are mostly Electricity and Magnetism. The basic subjects of the course are Properties of electric charges, Coulomb’s law, and Electric field of a continuous charge distribution, Gauss’s law and electric flux. Application of Gauss’s law to charged insulators, Obtaining the value of the electric field from the electric potential, Electric potential and the potential energy due to point charges, Electric potential due to continuous charge distributions, Electric current, Resistance and Ohm’s law, Electromotive force, Resistors in series and in parallel. Kirchhoff’s rules. For completeness, the students are supposed to do 6 experiments all are related to the subjects of the course.
TURKISH LANGUAGE
Course code
TREG100Credit
0Theoretical
2Practical
0Ects
2
This course examines basic areas of language and expression. In the first half of the course, the theoretical approach to language is formed and the spelling rules of the Turkish language are studied. In the latter part of the course, language and narrative errors are studied together with editing. In the second half of the course, formal writing, curriculum vitae, petition, evaluation of the columns in terms of language and style, types of written expression and practice; Turkish production and application of shooting attachments; Turkish grammar structure; It is aimed to teaching subjects like phonetics of Turkish to students.
TURKISH
Course code
TURK100Credit
0Theoretical
2Practical
0Ects
2
This course provides an orientation to modern Turkish language for foreign students who wish to communicate in this language for their needs. It mainly focuses on the differences between Turkish and English Alphabets, especially the sounds and the letters which are not included in the English alphabet (i.e. Turkish letters ç-ğ-i-ö-ş-ü). In addition, basic grammar and sentence structure forms in Turkish are practised. The required grammar and vocabulary will also be developed through their adaptation to daily situations in contexts such as introducing yourselves, greeting, talking about the things they possess by using possessive adjectives, forming positive, negative and question sentences by using present simple, telling the time, talking about their own timetables, using demonstrative pronouns when describing the place of objects and becoming familiar with vocabulary related to family members.
Third Semester
CIRCUIT THEORY I
Course code
EELE211Credit
4Theoretical
3Practical
2Ects
6
The course provides students with fundamental Concepts of Circuit Theory: Current, Voltage, Power and Energy as well as Definitions of Circuit Componentes: Voltage Current Sources; Resistors and Ohm's Law. Computation of Power over a Resistor, Set Up Circuit Model. Kirchhoff's Current and Voltage Laws. Resistors in Series and Parallel Configuration; Voltage and Current-Divider Circuits. Ampermeter, Voltmeter and Ohmmeter Circuits. Wheatstone Bridge, Triangle-Star Transformation. Loop Currents and Node Voltages Techniques, Source Transformation. Linearity and superposition principles, source transformations. Thevenin's and Norton's Theorems, Maximum Power Transfer, Graf Theory. Inductance and capacitance. The natural and forced response of the first – order (RL and RC) circuits. Natural and step responses of second-order RLC circuits.
DIGITAL LOGIC DESIGN
Course code
EELE221Credit
4Theoretical
3Practical
2Ects
7
This course presents the basic tools for the design and analysis of digital circuits and provides methods and procedures suitable for a variety of digital design applications in computers, control systems, data communications, etc. The course introduces data representation in binary systems, complements, Boolean algebra, logic gates, truth tables, logic circuits, timing diagrams, De Morgan's law, algebraic manipulation, minterms and maxterms, Sum of Products (SOP) and Product of Sums (POS) forms, Boolean function simplification tools and Karnough Map method, NAND and NOR implementations, don't care conditions, combinational circuit design and analysis procedures, and design of Adders, Subtracters and Code Converters.
DISCRETE MATHEMATICS
Course code
MATH122Credit
3Theoretical
3Practical
1Ects
5
The objective of the course is to introduce the students fundamental principles: logic and Boolean algebra, set theory, relations( Partial ordering, Total ordering and Hasse diagrams, Equivalence relations and equivalence classes), functions(one-to-one, onto, identity, inverse and composition of functions), inductive proofs and recurrence relations, counting techniques(multiplication and addition rules, permutations, combinations, unordered samples with repetitions, principle of inclusion and exclusion, pigeonhole principle) and introduction to graph theory(basic terminology like vertex, edge, degree of a vertex in directed and undirected graphs, Eulerian and Hamiltonian graphs, trees and spanning trees, minimal spanning trees, Prim’s Algorithm, Kruskal Algorithms, Shortest Path Problems, Dijkstra’s Algorithm).
MATHEMATICAL METHODS FOR ENGINEERS
Course code
MATH202Credit
3Theoretical
3Practical
1Ects
6
Aim of this course is to give complex analyse and fundamental methods to solve numerical problems in mathematics, computer science, physical sciences and engineering. Topics included are as follows: Definitions: Error types, Taylor series and truncation error and rounding numbers. Numerical solution of nonlinear equations; Bracketing methods, Bisection and False position, Iterative methods: Fixed point and Newton method. Numerical methods for solution of linear systems, Iterative methods and LU decomposition methods. Interpolation and polynomial approximation, Lagrange polynomials, Least square lines, curve fitting and spline functions (linear and quadratic). Evaluate derivatives by numerical analysis, numerical differentiation, finite difference formulas. Evaluate integrals by numerical analysis, numerical integration, Simpson's rules and Trapezoidal rules. Complex numbers, complex functions, derivative and integral of complex functions.
INTRODUCTION TO PROBABILITY AND STATISTICS
Course code
MATH205Credit
4Theoretical
4Practical
1Ects
6
The objective of this course is to introduce basic probability and statistics concepts. The focus of this course is on both applications and theory. Topics include: introduction to random variables, simple data analysis and descriptive statistics, frequency distribution, cumulative distribution, sample space, events, counting sample points (basic combinatorics), probability of an event, probability axioms, laws of probability, conditional probability, Bayes’ rule, discrete and continuous random variables, probability distributions, cumulative probability distributions, discrete and continuous probability distributions, discrete uniform, Binomial, Geometric, Hypergeometric, Poisson, Continuous uniform, Normal Disributions, Gamma and Exponential distribution, jointly distributed random variables, expectation and covariance of discrete and continuous random variables, random sampling, sampling distributions, distribution of Sample Mean, Central Limit Theorem(CLT).
Fourth Semester
CIRCUIT THEORY II
Course code
EELE212Credit
4Theoretical
4Practical
1Ects
5
Impedance, admittance and Kirchhoff"s laws in the frequency domain. Sinusoidal steady state analysis using the nodal and mesh techniques. Sinusoidal steady state analysis using source transformation and superposition. Thevenin and Norton Equivalents in the frequency domain. Instantenous power, average power and RMS value. Maximum average power transfer. Apparent power, power factor and the complex power. Power factor correction. Balanced Three-Phase voltages. Balanced Three-Phase connections: Y-Y, Y-Delta, Delta-Delta. Power in three phase systems. Mutual inductance and energy in a coupled circuit. Linear transformers. Ideal transformers. Transfer function, the decibel scale and Bode plots. Series and parallel resonance. Passive filters Active filters, properties of the Laplace transform. Applicaton of the Laplace transform. Application to integrodifferential equations and network stability.
ELECTRONIC PROPERTIES OF MATERIALS
Course code
EELE224Credit
3Theoretical
3Practical
0Ects
5
Wave-particle duality . Electromagnetic radiation behaving like particles. Photoelectric effect. Compton effect. De Broglie's hypothesis. Heisenberg's uncertainty principle. Overview of classical mechanics. Schrödinger's wave equation. Interpretation of wave function. Free electrons. Infınite square well. Tunneling. Scanning tunneling microscope. Three dimensional potential box. Hydrogenic atom. Electron spin. Stern-Gerlach experiment. Pauli's exclusion principle. Lasers. Free electron theory of metals. Fermi-Dirac statistics. Fermi energy. Band theory of solids. Fermi-Dirac statistics. Intrinsic semiconductors. Electrons and holes.Conduction in semiconductors. Semiconductors; impurities; carrier transport in semiconductors; generation and recombination of minority carriers. n- and p-type doping. Compensation doping. Semiconductor devices. Ideal p-n junction.
ELECTROMAGNETIC THEORY I
Course code
EELE234Credit
3Theoretical
3Practical
1Ects
5
Review of vector calculus. Electrostatics in vacuum. Coulomb's Law and Gauss's laws; Electric Field. Electrical Potantial,Force-Energy and Potantial Units. Poisson's and Laplace's equations. Conductors in the presence of electrostatic fields. Method of images. Dielectrics; polarization. Dielectric boundary conditions. Capacitors with Dielectrics, Energy of the Capacitor and Capacitance. Electrostatic energy. Electrostatic forces by the virtual work principle. Steady currents. Ohm's and Joule's laws. Static Magnetic Fields of Stable Electric Currents. Resistance calculations. Magnetostatics in vacuum. Ampere's force law. Biot-Savart law. Magnetic vector potential. Ampere's circuital law. Magnetic boundary conditions. Magnetic dipole. Magnetization. Hysteresis curve. Self and mutual inductance. Magnetic stored energy. Magnetic forces by the virtual work principle.
ENGINEERING ECONOMY
Course code
INDE232Credit
3Theoretical
3Practical
0Ects
4
The purpose of this course is to provide an introductory basis for economic analysis in decision making process in engineering design, manufacturing equipment and industrial projects. This course aims to supplement engineering students with the knowledge and capability to perform financial analysis especially in the area of capital investment. It emphasizes the systematic evaluation of the costs and benefits associated with proposed technical projects. The student will be exposed to the concepts of the “time value of money” and the methods of discounted cash flow. Students are prepared to make decisions regarding money as capital within a technological or engineering environment. Assignments and homework help and guide the students to apply the knowledge acquired during the course.
DIFFERENTIAL EQUATIONS
Course code
MATH203Credit
3Theoretical
3Practical
1Ects
6
In this course, the ordinary differential equations and their applications will be considered. The course will demonstrate the usefulness of ordinary differential equations for modelling physical and engineering problems. Complementary mathematical approaches for their solution will be presented, including analytical methods. The basic content of the course includes first order ordinary differential equations and their types of exact, separable, Bernoulli, first order, homogeneous ordinary differential equations, linear independence of the solutions, higher order ordinary differential equations and their solutions. The undetermined coefficient methods, the variation of the parameter method, Cauchy-Euler equations. The definition of the Laplace transform and some important applications of the Laplace transform will be included in this lecture.
UNIVERSITY ELECTIVE
Course code
UNIEXX1Credit
3Theoretical
3Practical
0Ects
5
UNIVERSITY ELECTIVE
Fifth Semester
SIGNALS & SYSTEMS
Course code
EELE321Credit
4Theoretical
4Practical
1Ects
6
Classification of Signals and Basic Signal Properties. Time Domain Models of Linear Time Invariant (LTI) Systems: Continuous time systems. Causal LTI systems described by differential equations. System block diagrams. The solutions of differential equations. The unit impulse response and convolution integral. State variable analysis of LTI systems. Discrete time systems. The unit sample response and discrete convolution. Fourier series and Fourier transform representation of continuous-time and discrete- time periodic signals. Time and frequency characterization of signals and systems. Z-transform and inverse z-transform. Region of convergence of the z-transform. z-domain analysis of discrete LTI systems. LTI Systems With Random Inputs. Definition of Random variables, stochastic process, first and second order statistics, moment, correlation and co-variance, stationary process, ergodicity. System resonse.
LINEAR CONTROL SYSTEMS
Course code
EELE326Credit
4Theoretical
4Practical
1Ects
6
Concepts of modeling, and analysis of electromechanical systems in time and frequency domains, feedback and feed forward controllers, stability criteria, design of controllers. Physical systems and the concept of control systems, mathematical backgraund, mathematical modelling of physical systems, transfer functions, block diagrams, signal flow grapghs, state variables and state-space modelling, simulation diagrams and computer simulation of the systems, test signals and transient responses of first and the second order systems. Design in time and frequency domains. Root locus analysis and design, Stability of control systems. The concept of Routh-Hurwitz stability, Nyquist stability criterion, and Bode plots. PID controllers: analysis and design. Optimal control systems, intelligent control, introduction to digital control systems. Computer based simulations and applications related to all topics.
ELECTROMAGNETIC THEORY II
Course code
EELE331Credit
3Theoretical
3Practical
1Ects
6
Review of Electromagnetic Field Theory. Electromagnetic induction; Faraday's and Lenz's laws; transformer and motional Electromotive force; induction heating; transformer; displacement current; time-varying fields; Maxwell’s Equations in differential and integral forms; the law of conservation of charge; wave equations; time-harmonic fields; complex phasors; scalar and vector potential functions; plane waves in vacuum; plane waves in dielectrics and conductors; polarization; skin effect; Electromagnetic energy and power; Poynting's theorem; Electric and Magnetic Field Boundary Conditions Boundary conditions for the tangential and normal components of the fields. Reflection and refraction of plane waves at dielectric interfaces; The basic laws and Fresnel’s equations. Snell’s Law. The Brewster angle. Nonuniform plane waves and total reflection. Reflection and refraction at the surface of an good conductors, standing waves.
ELECTRONICS I
Course code
EELE341Credit
4Theoretical
3Practical
2Ects
5
Operational amplifiers: common mode and difference mode process. Op-amp applications: voltage adder, voltage follower, differential amplifier, derivate and integrator circuits, active filter design. Semiconductor elements and diodes. Diode equivalent circuits. LEDs and zener diodes. Load line analysis. Half-wave and full-wave rectifier circuits. Bipolar junction transistor: Operation limits of transistors, testing and electrical specifications. DC biasing of transistors: Determining of operation point, voltage divider biasing, voltage feedback biasing and other biasing types. Transistor switching circuits. PNP transistors and stability of biasing. Characteristic of field effect transistors. Depletion-type MOSFETs, Enhancement-type MOSFETs, VMOS and CMOSs. Biasing of field effect transistors. Self-biasing and voltage divider biasing. Biasing of depletion-type MOSFETs and enhancement-type MOSFETs. Other two gates: Varactor, power diodes, tunnel diode, photodiode.
ELECTROMECHANICAL ENERGY CONVERSION
Course code
ENRE305Credit
4Theoretical
3Practical
2Ects
5
This course analyzes magnetic materials, magnetic parameters and magnetic properties of the materials. Application of soft magnetic materials and magnetic circuits are also involved in the course. Single phase transformers are analyzed in two categories such as ideal transformers and real transformers. Special purpose transformers such as auto-transformers and their power rating advantage are analyzed. This course also aims to examine three-phase transformers and their functions in power distribution systems. DC machinery fundamentals, simple rotating loop, power flow and losses of real DC machines, analysis of shunt and series connected DC machines and DC generator fundamentals are also take significant part in the course.
Sixth Semester
ELECTRONICS II
Course code
EELE342Credit
4Theoretical
3Practical
2Ects
6
Junction field-effect transistors (JFETs): physical structure and modes of operation, input and output parameters and characteristics. JFET biasing configurations, fixed bias, self bias, Small-signal analysis of JET amplifiers Frequency response of BJT amplifiers, high-frequency BJT model, Miller’s theorem. High frequency response of commonemitter amplifier, bandwidth estimation, bode plots. High frequency response of JFET amplifiers, JFET model at high frequency, high frequency response of BJT amplifiers. Broadband amplifier design, single-stage broadbanding techniques, gainbandwidth product, base compensation. Cascade amplifiers. Multistage amplifiers. BJT differential amplifier, differential and common-mode gains, biasing, current mirror Feedback amplifiers, the general feedback structure, properties of negative feedback:. The four basic
feedback topologies, determining the loop gain, stability problem.
COMMUNICATION SYSTEMS
Course code
EELE362Credit
4Theoretical
4Practical
1Ects
5
Properties of signals and noise, Fourier Transform and properties of the Fourier Transform. Power spectral density and autocorrelation function, Fourier series expansion and linear systems. Discrete Fourier Transform (DFT), bandwidth requirement of signals. Pulse Amplitude Modulation (PAM) employing natural sampling and flat-top PAM. Pulse Code Modulation (PCM): Sampling, quantizing and encoding, bandwidth requirement of PCM, quantization noise, binary line coding. Inter-symbol Interference (ISI), Nyquist’s method for zero ISI and roll-off filtering. Time-division multiplexing (TDM) and TDM hierarchy, frame synchronization. Radio Frequency (RF) components: limiters, mixers, up and down converters, frequency multipliers, etc. Envelope detector, product detector, frequency detector, PLL. Generalized transmitters and receivers: The superheterodyne principle. Amplitude modulation (AM), Double-Sideband Suppressed Carrier (DSBSC) and asymmetric sideband signals (SSB, VSB). Phase and frequency modulated signals (FM, PM).
FREE ELECTIVE
Course code
FREEXX1Credit
3Theoretical
3Practical
0Ects
7
FREE ELECTIVE
FREE ELECTIVE
Course code
FREEXX2Credit
4Theoretical
3Practical
2Ects
7
FREE ELECTIVE
FREE ELECTIVE
Course code
FREEXX3Credit
3Theoretical
3Practical
0Ects
7
FREE ELECTIVE
Seventh Semester
SUMMER TRAINING
Course code
EELE300Credit
0Theoretical
0Practical
0Ects
5
Engineering summer training is the thirty working days long internship period in which the engineering students are expected to apply their theoretical knowledge, which they acquired during their Bachelor level studies, in a real life professional environment. Summer training can be performed at any institution which is involved in any of the Electrical and Electronic Engineering subdisiplines. During the training, the engineering students encounter with the professionals and the real life tasks, so that they have a better chance to prepare themselves for the industries’ needs and decide on their exact field of professional interests. At the end of the thirty days of training, which is performed after the third year of the bachelor studies, the students write their summer training reports which summarize their internship experience. The internship period of a student is then judged by the committee evaluation of his/her summer training report.
ROBOTICS
Course code
EELE411Credit
3Theoretical
3Practical
1Ects
4
This course introduces fundamentals of robot control. Brief review about robots, hardware and robot problems will be explained to give a general idea about the use of robotics. Various types of basic sensors are also be discussed under the issue of robot hardware. Agent function design will be taught to gain robot control algorithm development and design. Robot control programming with mostly used controllers and related programming language concepts will also be covered to improve hardware programming skills of participants of this course. Lectures give the background to the extensive hands-on practical work using the laboratories A practical project will be performed to have an experience about to control a real robots with microcontroller.
AREA ELECTIVE
Course code
EELEXX1Credit
3Theoretical
3Practical
0Ects
6
AREA ELECTIVE
PROJECT MANAGEMENT
Course code
ENGI401Credit
3Theoretical
3Practical
0Ects
5
This course is designed to focus on project management framework, project integration management, project scope management, project communication management and teamwork, health & safety, engineering ethics, environmental management, risk management and sustainability, entrepreneurship and feasibility report, legal aspects in project management. This course also prepares the senior students to select their capstone design projects and form teams. The students undertake literature review for their projects, prepare feasibility report, and a written/oral presentation at the end of the term.
POWER TRANSMISSION AND DISTRIBUTION
Course code
ENRE401Credit
4Theoretical
4Practical
1Ects
4
General structure of Electric power systems. Electrical characteristics of transmission lines, transformers and generators: series impedance and capacitance of transmission lines, current – voltage relations on a transmission line for short, medium and long lengths. System modeling of synchronous machines, transformers, transmission lines and loads. Representation of power systems. Per unit analysis of power systems. Bus admittance matrix. Power flow analysis. Power circle diagram. Traveling waves, reflections. Symmetrical three – phase faults. Symmetrical components. Unsymmetrical components. Single line to ground, double line to ground and line to line faults. Basic probability methods for power system reliability evaluation. Failure Time, Failure Distribution Function and Reliability Function. Network modeling and evaluation of system reliability.
UNIVERSITY ELECTIVE
Course code
UNIEXX2Credit
3Theoretical
3Practical
0Ects
5
UNIVERSITY ELECTIVE
Eighth Semester
AREA ELECTIVE
Course code
EELEXX2Credit
3Theoretical
3Practical
0Ects
6
AREA ELECTIVE
AREA ELECTIVE
Course code
EELEXX3Credit
3Theoretical
3Practical
0Ects
6
AREA ELECTIVE
AREA ELECTIVE
Course code
EELEXX4Credit
3Theoretical
3Practical
0Ects
6
AREA ELECTIVE
CAPSTONE PROJECT
Course code
ENGI402Credit
4Theoretical
2Practical
4Ects
8
This course is an interdisciplinary project based course involving engineering design, cost estimating, environmental impacts, project schedule and team work. Students are expected to work in pre-assigned team under the supervision of faculty on a predetermined project. Each team will submit a final report including drawing, specification, and cost estimate that completely describe their proposed design. Each team will make oral presentation defending their final design and project feasibility to peers and faculty members.
UNIVERSITY ELECTIVE
Course code
UNIEXX3Credit
3Theoretical
3Practical
0Ects
5Elective Courses
POWER SYSTEM PROTECTION
Course code
EELE416Credit
3Theoretical
3Practical
0Ects
The performance of instrument transformers, transducers, protective relays, and circuit breakers is first addressed. These devices are then integrated into coordinated protective systems for generators, transformers, transmission lines, reactors, capacitor banks, system buses, etc. Trade-offs between reliability, selectivity, speed, simplicity, and economy are emphasized. The topics of this course are : Power system unsymmetrical faults. Line to ground, line to line, double line to ground unsymmetrical faults. Current and voltage transformers. over current relay. Application of DTOC and IDTM relay for protection of a distribution feeder. Protection of three-phase feeder, directional over current relay. Differential protection. Zone of protection of the differential relay. Transformer protection. Busbar protection. Distance protection of Transmission line. Generator protection. Motor protection.
SOLAR ENERGY TECHNOLOGY
Course code
ENRE311Credit
3Theoretical
3Practical
0Ects
The aim of this course is to introduce students the fundamental technology associated with photovoltaic systems including semi-conductor physics, cells and modules. Environmental characteristics such as solar angles, sun path diagrams, solar radiation, thermal radiation and the radiation on tilted surfaces are examined. PV cell types including crystalline solar cells, c-Si, thin film and multi-junction solar cells are discussed. PV system component are introduced. Planning and sizing grid-connected and stand-alone PV systems are also involved in the course. The course aims to teach the students how to design a PV system using simulation software. Students also learns about solar thermal systems, their types and technologies, efficiency and costs.
WIND ENERGY TECHNOLOGY
Course code
ENRE312Credit
3Theoretical
3Practical
0Ects
The main objective of the course is to present an overview of wind energy, covering all aspects from operation of a wind turbine to planning a wind farm. The course introduces the facts governing the availability and exploitation of wind power, the reasons for wind energy utilization, and, instructs the students to conduct a wind resource estimation. The fundamental concepts of wind turbine design and operation, types of wind turbines, the economic, technical and environmental factors affecting wind turbines and respective type selection are covered. Planning, installation, commissioning and economic analysis of wind farms are also discussed within the scope of this course.
PROGRAMMING IN MATLAB FOR ENGINEERING
Course code
ENGI316Credit
3Theoretical
3Practical
0Ects
CONVENTIONAL AND ALTERNATIVE ENERGY RESOURCES
Course code
PNGE452Credit
3Theoretical
3Practical
0Ects
0
The potential problems surrounding the use of fossil fuels, particularly in terms of climate change, contributing to global warming became a real concern for the humanity and the eco-system. Today, there is a growing shift towards environmental awareness and the the current energy-mix is coming under closer scrutiny leading to the rise of cleaner alternative energy sources. While the viability of each can be argued, they all contribute something positive when compared to fossil fuels..Lower emissions, lower fuel prices and the reduction of pollution are all advantages that the use of alternative fuels can often provide. Understanding the basic characteristics as well as pros and cons of both the conventional and alternative sources is a prerequisite for a sustainable future.
ETHICS
Course code
INDE335Credit
3Theoretical
3Practical
0Ects
4
The aim of this course is to awaken a sense of moral responsibility as decision makers. It can be happen by giving the moral imagination of students, helping students to recognize ethical issues and think ethically about the possible outcomes of making decisions, developing analytical skills on how to analyze an ethical situation and use neutral techniques to make an ethically optimal decision. This course is designed to introduce moral rights and responsibilities of engineers in relation to society, employers, colleagues and clients. Importance of intellectual property rights and conflicting interests. Ethical aspects in engineering design, manufacturing, and operations. Cost-benefit-risk analysis and safety and occupational hazard considerations.
ARTIFICIAL INTELLIGENCE
Course code
CMPE415Credit
3Theoretical
3Practical
1Ects
7
This course teaches artificial intelligence from an intelligent systems perspective which includes the methods (tools) to build systems that can plan, learn, reason and interact intelligently with their environment. The course introduces the key components of the artificial intelligence (AI), the agent-based AI architecture, artificial intelligence techniques to solve problems for a particular domain, appropriate search methods in achieving desired goals, and knowledge representation using various techniques. The topics are as follows: intelligent agents, problem solving, uninformed search strategies, informed search strategies, knowledge representation, logical inference, propositional logic, first-order logic. The artificial intelligence methods studied are experimented using a programming language and the students are expected to complete a project related to an artificial intelligence algorithm with its software implementation.
INTRODUCTION TO MICROCONTROLLER PROGRAMMING
Course code
ELE328Credit
3Theoretical
3Practical
0Ects
0
INTRODUCTION TO MICROCONTROLLER PROGRAMMING
DIGITAL SIGNAL PROCESSING
Course code
EELE420Credit
3Theoretical
3Practical
0Ects
ENERGY SYSTEMS-I
Course code
ENRE303Credit
3Theoretical
3Practical
1Ects
5
The aim of this course is to provide a comprehensive picture of the conventional and renewable energy systems. This course provides an introduction to engineering principles and designs for the key sustainable/renewable and conventional energy technologies. This course is structured to familiarize students with the wide range of information on sustainable energy technologies and environmental impact of energy systems. This course starts with the conventional energy resources such as coal, natural gas, petroleum and nuclear energy and is followed by mainstream renewable energy sources such as wind and solar energy. The current status of the sources systems as well as the outlook to the near future with scientific projections take significant part in the course.
WORLD ENERGY POLITICS
Course code
PNGE451Credit
3Theoretical
3Practical
0Ects
0
Supplying energy in an uninterrupted, sustainable and affordable way is one of the most vital area that every nation should justify for it’s current and future demand. Therefore we need to increase the awareness of our young generation on this critical area. The course will focus on: Energy resources, Fossil fuels; their worldwide geographical distribution, why it matters Energy Technologies, World Energy Outlooks, Energy prices and markets, Major actors of the energy scene, Main principles of a sustainable energy policy, Energy policies and strategies of principal actors (U.S., Russian Federation, E.U., China, Turkey), Eastern Mediterranean energy geopolitics The concept of “energy security”. Definition, main parameters. Electricity security
DIGITAL CONTROL SYSTEMS
Course code
EELE403Credit
3Theoretical
3Practical
1Ects
This course introduces digital control and discrete transform (z-transform). Introduction to sampled data and discrete modeling of systems. Discrete and hybrid Signal Flow Graphs (SFG)s. Students will learn designing controllers and applying compensation techniques both in s and z domains.The topics are: Review Of The Root Locus Method. Controller Design in S-Domain. Frequency Response Methods.Implementation of a Control Law on a Microprocessor.Sampling and Reconstruction.Digital Design: Introduction to Z- Transform.Open Loop and Closed Loop Discrete Time Systems.The S - Z Plane Mapping, Second Order Desired Response.Z - Plane Root Locus.Controller Design in Z - Plane, PI Controllers.Controller Design in Z - Plane, Pole-Zero Compensation and PID Controllers. Stability
ENVIRONMENTAL IMPACT ASSESSMENT
Course code
ENVE402Credit
3Theoretical
3Practical
0Ects
The objective of this course is provide knowledge on environmental impacts and environmental impact assessment. The course content includes history and basics of environmental impact assessment; framework and legal considerations for impact assessment; predictions of impacts on air, soil and water quality, noise level, and the biological environment; methods of impact analysis; public participation in the environmental impact assessment process; environmental impact assessment reports. Examples of previously used environmental impact assessment reports of various engineering projects are studied as cases studies in the lectures. The course uses lecture notes and discussions for the theoretical information and a term project practicing on how to conduct an environmental impact assessment on an imaginary project learning to use the theory in practice.
IMAGE, VIDEO AND SPEECH CODING
Course code
EELE468Credit
3Theoretical
3Practical
0Ects
IMAGE, VIDEO AND SPEECH CODING
MANAGEMENT INFORMATION SYSTEMS
Course code
ISYE263Credit
3Theoretical
3Practical
0Ects
4
This course is for students who wanted an in-depth look at how today’s business firms use information technologies and systems to achieve corporate objectives. Information systems are one of the major tools available to business managers for achieving operational excellence, developing new products and services, improving decision making, and achieving competitive advantage. Students will find here the most up-to-date and comprehensive overview of information systems used by business firms today. When interviewing potential employees, business firms often look for new hires who know how to use information systems and technologies for achieving bottom-line business results. Regardless of whether you are in finance, management, marketing or information systems major, the knowledge and information students will find in this course will be valuable throughout their career.
SIGNAL AND IMAGE PROCESSING
Course code
CMPE326Credit
3Theoretical
3Practical
1Ects
6
Signal and Image Processing course is organised to introduce the fundamentals of digital signal and image processing techniques. The emphasis will be on analysis tools, the design of digital filters, and on the computation of the Discrete Fourier Transform (DFT). The course is designed to give all the fundamental concepts in digital image processing with emphasis in spatial filtering, frequency domain filtering, image enhancement, image restoration, compression, segmentation. Morphological image processing and the introduction to object recognition are the last topics of the course. Included in these topics, the interpolation techniques, frequency domain filtering and image averaging methods for noise removal are important topics covered. The studied methods are experimented using simulator program.
VISUAL PROGRAMMING
Course code
CMPE214Credit
3Theoretical
3Practical
1Ects
6
This course is an introductory programming course for visual programming. Event-driven, visual and structured programming concepts will be presented. Initially, the emphasis will be on fundamentals of visual programming and basic controls. Then, advanced controls, file and database management features will be presented. Programming projects will involve common problems that require data entry, display of calculated results, conditional testing, arithmetic operations, array processing, searching, sorting, reading and writing files, and operations on databases.
SURGICAL INSTRUMENTATION
Course code
MEDE402Credit
3Theoretical
3Practical
0Ects
FUNDAMENTALS OF COMPUTER NETWORKS
Course code
CMPE332Credit
4Theoretical
3Practical
2Ects
7
This is an introductory course in computer networks. It first introduces uses of Computer Networks in Business, Home and Mobile environment. Next discusses types of computer network range from personal area network to Internet. It then studies the implementation principles and design issues at each layer of network models. Lecture topics include: OSI and TCP/IP models, data transmission basics, data-link, application Layer protocols, guided and unguided transmission, satellite communication ( LEO, MEO, GEO) digital modulation and multiplexing, PSTN and Mobile telephone systems. Laboratory work focuses on building and studying a physical network using network devices, wired and wireless medium.
COMPUTER AIDED DATA ANALYSIS
Course code
INDE491Credit
3Theoretical
3Practical
0Ects
ENERGY EFFICIENCY AND MANAGEMENT
Course code
ENRE313Credit
3Theoretical
3Practical
0Ects
5
This course includes the identification of the energy conservation measures in various equipment and utilities. Practical aspects of energy conservation and how to use the various rules of thumb to estimate the losses occurring in a system are stated. This course also reviews the scientific foundations and principles of energy use and management. In addition, energy efficiency and energy conservation measures are also discussed in the basis of economic and life cycle cost analysis. The goal is to help students develop sufficient understanding of energy issues to contribute successfully in managing their own energy budget and in developing business applications and improving policy. Energy efficiency in lighting, building envelope and ventilation systems is discussed.
ENVIRONMENTAL MANAGEMENT
Course code
ENVE407Credit
3Theoretical
3Practical
0Ects
5
This course is an introduction to the interaction among social, political, cultural, ecological and economic factors in the field of environmental management and is centrally concerned with understanding deliberate efforts to translate environmental knowledge into action in order to achieve particular outcomes in the way landscapes, societies and/or natural ecosystems are used and managed. The course will provide a critical survey of the contemporary field of environmental policy, planning and management. It will also consider how the objectives for land and resource use are shaped, fashioned and contested in democratic and non-democratic settings. Student’s will be tought dynamics and processes that impact ecological systems and they will understand the basic components of a sustainable development framework, study concepts of sustainable development theory and practice.
CLOUD COMPUTING
Course code
CMPE481Credit
3Theoretical
3Practical
0Ects
MODELING AND SIMULATION
Course code
EELE246Credit
3Theoretical
3Practical
0Ects
INTRODUCTION TO CRYPTOGRAPHY AND NETWORK SECURITY
Course code
CMPE336Credit
3Theoretical
3Practical
0Ects
Introducing the main concepts used in the modern cryptography is the main aim of the course. Mathematical concepts necessary for the modern crypt-algorithms are in the scope of the course. Classical encryption techniques are studied in the first chapters. Block ciphers and Date Encryption Standard (DES) is one of the main objectives of the course. Also, Advanced Encryption Standard (AES) algorithm is studied in details. Public key cryptography and RSA algorithm theory and implementations are the last topics for encryption models. The course ends with network security concepts and IP security standards. The students are expected to improve their skills with a project that requires the implementation of a cryptography algorithm and encryption/decryption of real data through the network.
ENERGY AUDITING
Course code
ENRE315Credit
3Theoretical
3Practical
0Ects
Students learn how to conduct an entire house and a small business audits that effectively targets to reduce the energy waste. The course includes the lighting, appliances, electronics, building envelope, machinery, motors, HVAC systems and water conservation. The students will also learn about alternative energy solutions that can help your client’s transition to wind and solar power. In addition calculation of Energy Use Intensity (EUI) and performing energy analysis are included in the course. The students learn to use the worksheets for calculating the performance assessment studies of energy systems.
BIOPROCESS ENGINEERING
Course code
BIOE308Credit
4Theoretical
3Practical
2Ects
7
The objective of the course is to give the students the main aspects of the Biological Reaction Engineering field and applications. Basic properties of the biotechnological process, their applications in various sectors, comparison of biotechnological process and chemical process. Bioconversions and bioprocess kinetics. Material denklikleri, Operation modes, batch, fed-batch, continuous and semi-continuous process. The usage of plant and animal cells as biocatalysts. Immobilized enzymes and cells. Transport phenomena in Bioprocess systems. Material balances, and operation variables acting on mass transfer. Aeration and mixing of bioreactors. Design variables acting on mass transfer. Heat transfer and sterilisation in bioreactors. Theory, applications and laboratory practicals of aerobic and anaerobic bioprocesses.
COMPUTER AIDED DESIGN
Course code
MCLE475Credit
3Theoretical
2Practical
3Ects
6
This course aims to study the Integration of computers into the design cycle. Interactive computer modelling and analysis. Geometrical modelling with wire frame, surface, and solid models. Finite element modelling and analysis. Curves and surfaces and CAD/CAM data exchange. The integration of CAD, CAE and CAM systems.
SOIL AND GRD.WATER POLLUTION
Course code
ENVE427Credit
3Theoretical
3Practical
0Ects
Overview of issues in contemporary environmental management and sustainability, both in general and in the local context. Environmental management and resource management are distinguished, as are management and governance. The course provides a broad view of relevant concepts and frameworks (for example, sustainability, the precautionary approach, systems thinking), trying these to the development of thinking about environmental governance and management. Water cycle, soil characterstics, sources of soil and groundwater contaminants, types of pollutants are mainly discussed during this course. Mass transport mechanism in vadose and saturated zones including diffusion, advection, adsorption and degradation are involed in dicussions. The remediation technologies for soil and groundwater presentations are also made to introduce students available technolgoies to overcome soil and groundwater pollution by treatment
DATA TRANSMISSION IN COMPUTER COMMUNICATIONS
Course code
CMPE331Credit
4Theoretical
3Practical
2Ects
4
The aim of this course is to provide a unified overview in the basic principles of data transmission and computer communications. The lecture emphasizes basic principles and topics of fundamental importance concerning the technology and architecture of this field, as well as providing the state of the art topics. Basic objectives includes providing a conceptual foundation for the study of data communications using the open systems interconnect (OSI) model for layered architecture and developing an understanding in basic hardware and software environments for data communications and computer networks.
EASTERN MEDITERRANEAN ENERGY GEOPOLITICS
Course code
PNGE340Credit
3Theoretical
3Practical
0Ects
0
Turkey is a significant energy consumer and a significant energy importing country. Energy import dependency is around 75 percent while the country has very significant indigenous but idle energy resources. Energy intensity is high and still rising offering a remarkable potential for improvement. To understand the basic characteristics, problems of Turkey’s current energy policy as well as the enormous indigenous resource potential for improvement will motivate the students to propose a more independent, sustainable and affordable energy policy. Turkey is in the center of the Eastern Mediterranean energy policy developments together with Cyprus island. Such integrated characteristic will enable the student to have a wholistic approach to solving the current dilemma around the region. However before proposing a solution, they should be better informed about the basics of the energy game and the specifics of the region.
IOT FOR ENGINEERING
Course code
ENGI416Credit
3Theoretical
2Practical
2Ects
5
This course is designed to explore the intricate world of Internet of Things (IoT) technologies with a focus on providing engineering students a comprehensive understanding from the ground up. Throughout the course, students will master IoT device programming, exploring different platforms, as well as analyzing sensing and actuating technologies. The course emphasizes networking principles, backhaul design strategies, and security enforcement relevant to IoT systems. Students will engage in practical assignments aimed at providing real-world experience. The projects include deploying a distributed Wi-Fi monitoring service and creating a cloud-based IoT service platform tailored for industrial settings. Upon completion of this course, students will gain a comprehensive understanding of IoT technologies and will be equipped to tackle challenges commonly encountered in industrial engineering environments.
ENGINEERING MANAGEMENT
Course code
INDE282Credit
3Theoretical
3Practical
0Ects
4
Review the enginnering management functions of planning, organizing, leading and controlling. Also, techniques of management, the matrix system of management, motivation, appraisal systems and prepare engineering students to become effective leaders in meeting the challenges in the new millenium. The course tries to give information in technical (an understanding of and proficiency in engineering and science); human (the ability to build a collaborative effort within a group); conceptual (the ability to apply analytical thought to the management process and to enterprise as a total system). Throughout the Engineering Management course, emphasis is placed on team-based approaches, written and oral communications skills, management of technology and continuous improvement.
MOBILE APPLICATION DEVELOPMENT
Course code
CMPE425Credit
3Theoretical
3Practical
0Ects
Introduction to Mobile Application Development, Mobile Application Platforms, Object-Oriented Programming, Java,XML and Hello Android Application, Activities, Fragments, and Intents, Getting to Know the Android User Interface, Designing Your User Interface with Views, Displaying Pictures and Menus with Views, Data Persistence, Location-Based Services, Networking- Consuming Services, Publishing Android Applications
INTRODUCTION TO BIOMETRIC SYSTEMS
Course code
CMPE466Credit
3Theoretical
3Practical
0Ects
This course will presents an introduction to the principles of operation, design, testing, and implementation of the unimodal and multimodal biometric systems. Major and emerging biometric technologies (fingerprint, face, hand, iris, hand geometry, palmprint, keystroke, handwriting, signature, gait, voice etc.) performance and issues related to the security and privacy aspects of these systems will be addressed. Students will be introduced to a variety of methods used for processing data from various biometrics (especially signature biometric modality) and to statistical methods employed to achieve acceptable performance rates (i.e. false accept rate, false reject rate, equal error rate and correct classification rates).
ADVANCED DIGITAL ELECTRONICS
Course code
EELE322Credit
3Theoretical
3Practical
1Ects
0
.
NETWORK ANALYSIS
Course code
INDE301Credit
3Theoretical
3Practical
0Ects
EMBEDDED SYSTEMS
Course code
CMPE455Credit
3Theoretical
3Practical
0Ects
5
This course introduce the basic knowledge of embedded systems on programmable chips. The given information will help to develop the ability to understand the concept of embedded systems in offline and online applications. The main aim of this course is to give students not only theoretical knowledge but also practical knowledge about different embedded systems. In addition, the common features of embedded systems and partitioning features such as inputs, outputs, interrupts and scheduling techniques will be covered in the course. Depending on the different embedded system types, these systems will be programmed using the relevant programming languages. Finally, various hardware-software designs and development tools will be introduced to broaden students' fundamental knowledge.
MIDDLE EAST ENERGY OUTLOOK
Course code
PNGE415Credit
3Theoretical
3Practical
0Ects
5
This course is designed to provide the most up-to-date information on current Middle East region’s energy resources and potential, the domestic demand and supply balance as well as the Middle East energy outlook for the coming decades. Continent-wide and country-based energy profiles and the energy policies of the prominent States (such as: S. Arabia, Iraq, Iran, Qatar, etc.) will be provided to the students. The role of oil and gas both for the Middle East and the World will be explained in detail. The trade and political relations between oil and gas exporting Middle Eastern States and major global importers (US, EU, China, etc.) will be discussed. Reports by the IEA, US Department of Energy and major energy companies will be studied and discussed.
SOIL AND GROUNDWATER POLLUTION
Course code
ENVE427Credit
3Theoretical
3Practical
0Ects
Overview of issues in contemporary environmental management and sustainability, both in general and in the local context. Environmental management and resource management are distinguished, as are management and governance. The course provides a broad view of relevant concepts and frameworks (for example, sustainability, the precautionary approach, systems thinking), trying these to the development of thinking about environmental governance and management. Water cycle, soil characterstics, sources of soil and groundwater contaminants, types of pollutants are mainly discussed during this course. Mass transport mechanism in vadose and saturated zones including diffusion, advection, adsorption and degradation are involed in dicussions. The remediation technologies for soil and groundwater presentations are also made to introduce students available technolgoies to overcome soil and groundwater pollution by treatment
BIOMEDICAL ENGINEERING AND INSTRUMENTATION
Course code
BIOE303Credit
3Theoretical
2Practical
2Ects
5
The objective is to develop a fundamental understanding of the principles of biomedical measurement systems used in the fields of molecular biology and biotechnology,
cell engineering, tissue engineering, and biomaterials used in medicine. Applications, diagnosis and treatment, biomedical instrumentation administration, security issues, biomedical technology and the biomedical engineer, their present and future. This course covers physiological signals, biomedical sensors, analogue signal amplification and filters, digital acquisition, digital filtering and processing, and an overview of several common medical instrumentation platforms.
Digital processing of biological signals, physiology of the heart and electrocardiogram (ECG), blood pressure measurements, physiology of the brain and electroencephalogram (EEG), Electromyography, Electromechanics of biological fluids.
COMPUTER SIMULATION
Course code
CMPE485Credit
3Theoretical
3Practical
0Ects
COMPUTER NETWORK DESIGN AND APPLICATIONS
Course code
CMPE431Credit
3Theoretical
2Practical
2Ects
7
This course gives basic working principles and the architecture underlying computer networks, and will go over the main components and applications of TCP/IP and the Internet. Course especially focused on Application layer architectures (client/server, peer-to-peer) and protocols (HTTP-web, SMTP-mail, etc), Transport layer operation (reliable transport, congestion and flow control, UDP, TCP);Network layer operation (routing, addressing etc). After completing this course, students will have gained the basic knowledge to understand the architecture of the Internet and how it has evolved. Also they will be able to understand how the Internet works, design and code their own TCP/IP applications and protocols, and solve simple configuration and performance problems that arise in practice.
TOTAL QUALITY MANAGEMENT
Course code
INDE428Credit
3Theoretical
3Practical
0Ects
HAZARDOUS AND SPECIAL WASTE MANAGEMENT
Course code
ENVE431Credit
3Theoretical
3Practical
0Ects
5
The objective of this course is to teach the definition of hazardous waste and strategies used to handle and manage hazardous waste. The course content includes sources, generators, and principles of collection, transport, characterization and management of hazardous waste. The focus is on various management technologies; reduction, reuse, recycle, physicochemical treatment, biological processes, incineration, stabilization and solidification, land disposal but also gives an insight to the corrective actions to be taken at hazardous waste spill sites, energy recovery from hazardous wastes, legal and administrative considerations of hazardous waste management. The course uses lecture notes and discussions for the theoretical information, exercises, tutorials, videos and a term project learning to use the theory in practice
WELL LOGGING
Course code
PNGE350Credit
3Theoretical
3Practical
0Ects
6
The course is designed to convey the understanding of well logging to the students. When exploration drilling is carried out usually at greater depths, the cores and sludghes obtained give significant information about the underground. However, especially when petroleum and natural gas exploration is in question, extra geophysical information is required to arrive at a result. In this context, the following topics will be underlined: Introduction to the fundamental concepts in well logging, necessary equipment for well logging, characteristics of well logging equipment, investigation of the nearby wellbores and geological-geophysical characteristics, electrical properties of different rock types, SP log, normal and lateral logs, laterologs, dual laterolog, induction logs, dual induction log, microresistivity logs, conventional interpretation techniques, computer aided interpretation techniques with specialized softwares.
THERMAL POWER ENGINES
Course code
MCLE446Credit
3Theoretical
3Practical
0Ects
MICROPROCESSORS
Course code
EELE324Credit
4Theoretical
3Practical
2Ects
7
The Microprocessors course includes the understanding of the main components and working principals of the microprocessor. Intel 80x86 family is used as a base microprocessor architecture. Course content includes the understanding of the basic computer architecture, memory organization and memory interfacing, programming and debugging in assembly language, developing programs that perform unsigned arithmetic (addition, subtraction, multiplication, and division), BCD, ASCII, logical and bitwise manipulation operations, performing input/output device programming in assembly language, input characters or strings from keyboard, output characters or strings to the screen, convert data to ASCII, packed BCD, unpacked BCD. Also, understanding the properties and interfacing of the parallel and serial ports and the design and interfacing of microprocessor-based systems using the real world example of the 80x86 IBM PC are in the scope of the course.
SPECIAL TOPICS IN ENVIRONMENTAL ENGINEERING I
Course code
ENVE494Credit
3Theoretical
3Practical
0Ects
5
This course provides various advanced level topics will be covered on environmental engineering, according to the need of students and interest of the instructor. Air pollution sources; dry and wet deposition processes; gaseous and particulate pollutant sampling and analysis methods; effect of meteorology on air pollution; air quality standards and legislation can be one of the topic. Emerging Pollutants, which is one of the new topics for Environmental Engineering field. their occurrence and fate in treatment plants and in the environment, their ecotoxicological effects to aquatic and terrestrial organisms and approaches for their environmental risk assessment can be chosenas a topic. Environmental biotechnology can be one of the special topic to discuss biological processes to create wide variety of products.
ELECTROMAGNETIC THEORY I
Course code
EELE234Credit
3Theoretical
3Practical
1Ects
6
Review of vector calculus. Electrostatics in vacuum. Coulomb's Law and Gauss's laws; Electric Field. Electrical Potantial,Force-Energy and Potantial Units. Poisson's and Laplace's equations. Conductors in the presence of electrostatic fields. Method of images. Dielectrics; polarization. Dielectric boundary conditions. Capacitors with Dielectrics, Energy of the Capacitor and Capacitance. Electrostatic energy. Electrostatic forces by the virtual work principle. Steady currents. Ohm's and Joule's laws. Static Magnetic Fields of Stable Electric Currents. Resistance calculations. Magnetostatics in vacuum. Ampere's force law. Biot-Savart law. Magnetic vector potential. Ampere's circuital law. Magnetic boundary conditions. Magnetic dipole. Magnetization. Hysteresis curve. Self and mutual inductance. Magnetic stored energy. Magnetic forces by the virtual work principle.
ARTIFICIAL ORGANS
Course code
BIME404Credit
3Theoretical
3Practical
0Ects
Curriculum before 2024-25
Click here to see curriculum
TR Applicants
TR Students who are successful in the exams conducted by the Higher Education Council Student Selection and Placement Center (ÖSYM) and are entitled to enroll in our university in line with their preferences can complete the registration process with the necessary documents for registration from our Registration and Liaison Offices throughout Turkey or from the Marketing Directorate on campus.
Click for detailed admission requirements information.
TRNC Applicants
TRNC citizens and TR citizen candidate students who have completed their entire high school education in TRNC. They are placed in undergraduate programs in line with their success in the CIU Student Placement and Scholarship Ranking Exam and the programs they prefer.
Students who are successful in the exam can register from the TRNC Marketing Office.
Applicants can directly apply online to our undergraduate programs using the application portal. Please fill in your details correctly and upload all the required documents listed on the last page of the application form.
Required documents;
- Completed application form,
- Higher/Secondary Certificate or equivalents (e.g. O/A’Level, WAEC/NECO),
- Evidence of English Language competence: TOEFL (65 IBT) or IELTS (5.5). Students without these documents will take the CIU English proficiency exam on campus following arrival,
- Scanned copy of international passport/birth certificate,
- Fully completed and signed CIU Rules and Regulations document (which can be downloaded during the online application).
Cyprus International University provides academic scholarships for its students as an incentive for success, with most students benefiting from 50%, 75% or 100% scholarships or discounted tuition fees. Click for more information.
Tuition Fees are determined at the beginning of each academic year. Candidate students who are entitled to enroll in CIU can learn their fees in line with the Tuition Fee Calculation system.
Program Outcomes
The program outputs of Electrical and Electronic Engineering Program cover all knowledge, skills and behaviors necessary to achieve the educational objectives of the program:
PO1: Have adequate knowledge in mathematics, science and electrical-electronic engineering; use the theoretical and practical knowledge in complex engineering problems.
PO2: Have the ability to identify, define, formulate and solve complex electrical and electronic engineering problems; and be able to select and apply appropriate analysis and modeling methods.
PO3: Be able to design a complex system, device or product related to electrical and electronic engineering by applying modern design methods to meet specific requirements under realistic constraints and conditions.
PO4: Have the ability to develop, select and use necessary modern techniques and tools for the analysis and solution of complex problems encountered in electrical and electronics engineering practices; have the ability to use information technologies effectively.
PO5: Be able to design and conduct experiments to collect data, to analyze and interpret results, to examine complex electrical - electronics engineering problems or disciplinary research topics.
PO6: Have the ability to work effectively in disciplinary and multidisciplinary teams or individually.
PO7: Have the ability to communicate effectively in oral and written Turkish; knowledge of at least one foreign language; have the ability to write effective reports, to understand written reports, to prepare design and production reports, to make effective presentations, and to give clear and understandable instructions.
PO8: Be aware of the necessity of lifelong learning; have the ability to access information, to follow developments in science and technology and continuously update his/her knowledge and skills.
PO9: Act in accordance with ethical principles, professional and ethical responsibility; learn about the standards used in engineering practices.
PO10: Have information on business practices such as project management, risk management and change management; be aware of entrepreneurship and innovation; and learn about sustainable development.
PO11: Be informed about the effects of electrical and electronic engineering practices on health, environment and safety in the universal and social dimensions; know the legal consequences of engineering solutions.
Educational Goals
Educational goals of the undergraduate program of Electrical and Electronic Engineering, Cyprus International University, is to represent important achievements our graduates are expected to achieve shortly after graduation. Electrical and electronic engineers who graduate from this program are expected to perform one or more of the following educational goals:
EG1: Take part in national or international projects and organizations; and cooperate with professionals from different fields.
EG2: Develop professional and social norms to implement EEM applications that create added value.
EG3: Keep up-to-date and compete with colleagues by attending seminars, courses, certified training programs and symposia.
EG4: Carry out graduate studies or work in research and development (R&D) units of industrial organizations.